# Unable to see where to enter the Trace No. when updating the certificate

**URL:** <https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304>\
**Category:** GAGEtrak\
**Created:** [August 14, 2026, 4:20pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304 "2026-08-14T16:20:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Flowserve](https://avatars.discourse-cdn.com/v4/letter/f/a5b964/32.png) [@Flowserve](https://forum.cybermetrics.com/u/Flowserve)\
**Post date:** [August 14, 2026, 4:20pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304/1 "2026-08-14T16:20:36Z")

</div>

Question about where to enter the Trace No in the calibration certificate.

 ![image](https://canada1.discourse-cdn.com/flex008/uploads/cybermetrics/original/1X/c5812e4b1b57e4b15ff117e97773c188b64fbb34.png)

---

<div class="post-metadata">

**Author:** ![DrewW](https://avatars.discourse-cdn.com/v4/letter/d/e99b99/32.png) [@DrewW](https://forum.cybermetrics.com/u/DrewW)\
**Post date:** [August 14, 2026, 4:29pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304/2 "2026-08-14T16:29:33Z")

</div>

Hello Flowserve,

The trace number for the tool is going to be located in the Gages page under the tools information. There should be a field on the left side of the information labeled “Trace No.”.

 ![image](https://canada1.discourse-cdn.com/flex008/uploads/cybermetrics/original/1X/c88bafacf3c19ee1b0b3a1c46a3a69843032f2d5.png)

---

<div class="post-metadata">

**Author:** ![Flowserve](https://avatars.discourse-cdn.com/v4/letter/f/a5b964/32.png) [@Flowserve](https://forum.cybermetrics.com/u/Flowserve)\
**Post date:** [August 14, 2026, 5:34pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304/3 "2026-08-14T17:34:21Z")

</div>

Hi Drew, The trace no. are for NIST traceability?

---

<div class="post-metadata">

**Author:** ![DrewW](https://avatars.discourse-cdn.com/v4/letter/d/e99b99/32.png) [@DrewW](https://forum.cybermetrics.com/u/DrewW)\
**Post date:** [August 18, 2026, 5:27pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304/4 "2026-08-18T17:27:14Z")

</div>

Hello Flowserve,

Depending on your national standards, yes. Here is a screenshot of the tool tip for the trace no.  
 ![image](https://canada1.discourse-cdn.com/flex008/uploads/cybermetrics/original/1X/bfe78174338c39f21b25df82e537b15a5f2a0c32.png)