# How to edit an existing Procedure in Gagetrak Lite, like if a form # changes **URL:** \ **Category:** GAGEtrak Pro/Lite\ **Tags:** gagetrak\ **Created:** [March 30, 2026, 7:47pm UTC](https://forum.cybermetrics.com/t/how-to-edit-an-existing-procedure-in-gagetrak-lite-like-if-a-form-changes/203 "2026-03-30T19:47:32Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![KEBE](https://avatars.discourse-cdn.com/v4/letter/k/ecb155/32.png) [@KEBE](https://forum.cybermetrics.com/u/KEBE)\ **Post date:** [March 30, 2026, 7:47pm UTC](https://forum.cybermetrics.com/t/how-to-edit-an-existing-procedure-in-gagetrak-lite-like-if-a-form-changes/203/1 "2026-03-30T19:47:32Z")
Hello, I am new to Gagetrak Lite. I had Gagetrak 7.0 and it was upgraded to the Lite version. I have some procedures that need to be updated that came from the old version. How do I edit the existing procedures? thanks. ---
**Author:** ![DrewW](https://avatars.discourse-cdn.com/v4/letter/d/e99b99/32.png) [@DrewW](https://forum.cybermetrics.com/u/DrewW)\ **Post date:** [March 31, 2026, 2:08pm UTC](https://forum.cybermetrics.com/t/how-to-edit-an-existing-procedure-in-gagetrak-lite-like-if-a-form-changes/203/2 "2026-03-31T14:08:51Z")
Hello Kebe, Welcome to the forum! To edit existing procedures, you first need to head to the procedures page. This can be found under the Configuration Menu option in the bottom left of GAGEtrak, then “Procedures” should be at the top of the navigational menu. Once within the procedures, some of the ones there might not be able to be edited because they’ve been used on a calibration. If this is the case, I recommend making a clone of the procedure, adjusting the revision level/date, then making the changes you would like to the cloned procedure. ---
**Author:** ![KEBE](https://avatars.discourse-cdn.com/v4/letter/k/ecb155/32.png) [@KEBE](https://forum.cybermetrics.com/u/KEBE)\ **Post date:** [March 31, 2026, 6:07pm UTC](https://forum.cybermetrics.com/t/how-to-edit-an-existing-procedure-in-gagetrak-lite-like-if-a-form-changes/203/3 "2026-03-31T18:07:42Z")
Hello Drew, thank you for your response. So, I will have to clone all of them since they all have been used. I appreciate your help! Thanks again. ---
**Author:** ![Mike](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@Mike](https://forum.cybermetrics.com/u/Mike)\ **Post date:** [May 6, 2026, 8:18am UTC](https://forum.cybermetrics.com/t/how-to-edit-an-existing-procedure-in-gagetrak-lite-like-if-a-form-changes/203/4 "2026-05-06T08:18:29Z")
Because of this reason we decided to do our procedures as attachments and kept our procedures on our internal network. This way when anything changes or gets updated GAGEtrak will still be current and we don’t have to clone anything. We were able to keep the procedures from getting “cluttered” by doing this.