# GAGEtrak Shuts Down or Responds Slowly When Printing Calibration Work Orders

**URL:** https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315
**Category:** GAGEtrak Pro/Lite
**Created:** [August 31, 2026, 12:15pm UTC](https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315 "2026-08-31T12:15:34Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![hsaintfelix](https://avatars.discourse-cdn.com/v4/letter/h/c68b51/32.png) [@hsaintfelix](https://forum.cybermetrics.com/u/hsaintfelix)
#### Post date: [August 31, 2026, 12:15pm UTC](https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315/1 "2026-08-31T12:15:34Z")

</div>

Good morning,

I need some help with printing work orders. I’m currently unable to print anything without the system shutting down. When it does print, it takes approximately 10–15 minutes to complete.

Could you please investigate this issue and help resolve it?

Thank you,

Henddy

---

<div class="post-metadata">

### Author: ![rstraube](https://yyz2.discourse-cdn.com/flex008/user_avatar/forum.cybermetrics.com/rstraube/32/22_2.png) [@rstraube](https://forum.cybermetrics.com/u/rstraube)
#### Post date: [August 31, 2026, 3:19pm UTC](https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315/2 "2026-08-31T15:19:42Z")

</div>

Hi Henddy,

Welcome to the forum, and thank you for reaching out. I moved your post to a separate topic so the issue with printing calibration work orders does not get lost in the ISO 9001 discussion.

I have opened a support case for you, and a member of our Support team will contact you to investigate the shutdowns and slow printing.

Thank you!