I have also have had this happen multiple times with my name under the “done by”. The workaround is to unsign and unselect the “completed” box, re-select “completed” and the label formats correctly.
I have had this happen to me before, several times. I am not sure the why of it happening, but I noticed that when it happened to me, it correlated with the schedules screen on the gage’s main entry tab. Esp when it is a new gage and the “last done by” is blank. my work around is to close the calibration window, click the reload button on the gages entry to make ensure the last done by name is correct, then reopen the calibration window to print the label.
Same with it coming up with your name as the done by. My calibration auto populates with the name of the responsible person. Even if I change it in the calibration entry, it sometimes doesn’t save right away on the schedules tab. So, I close the calibrations window, reload the gages entry, and reopen the calibration window to print the label.
It doesn’t always do this, just sometimes, and most often with gages that have not been calibrated before.
It also happens to our Gagetrak. The only work around for me is the same as yours. I have to re-tick the Completed box and re-save it. After that, Done By will not be BLANK.
I hope Gagetrak programmers fix this if this is a glitch on the software.