# GAGEtrak

**URL:** https://forum.cybermetrics.com/c/gagetrak/4.md?page=1

[Latest](https://forum.cybermetrics.com/latest.md) · [Categories](https://forum.cybermetrics.com/categories.md) · [Tags](https://forum.cybermetrics.com/tags.md)

**Page:** 2

---

## [Quick Tip: Gage Activities](https://forum.cybermetrics.com/t/quick-tip-gage-activities/106)

<div class="topic-metadata">

**Author:** [@DrewW](https://forum.cybermetrics.com/u/DrewW)\
**Replies:** 6\
**Last updated:** [October 1, 2026, 9:09pm UTC](https://forum.cybermetrics.com/t/quick-tip-gage-activities/106 "2026-10-01T21:09:28Z")

</div>

GAGEtrak lets you create activities and assign them to a gage and a custodian. These activities can be just about anything—routine maintenance, a visual inspection, or really whatever you need done on a tool. The nice pa…

---

## [Are there different license types for Gagetrak?](https://forum.cybermetrics.com/t/are-there-different-license-types-for-gagetrak/336)

<div class="topic-metadata">

**Author:** [@Jeremy\_Dressler](https://forum.cybermetrics.com/u/Jeremy_Dressler)\
**Replies:** 4\
**Last updated:** [October 1, 2026, 5:30pm UTC](https://forum.cybermetrics.com/t/are-there-different-license-types-for-gagetrak/336 "2026-10-01T17:30:15Z")

</div>

Management asked if we could buy a “read only” license. I told them we could set up a regular license with a log in that was read only. I think they were looking for a cheap way for QE’s to look at data without having…

---

## [Loading a template onto an existing gage](https://forum.cybermetrics.com/t/loading-a-template-onto-an-existing-gage/334)

<div class="topic-metadata">

**Author:** [@Jorge\_Garcia\_Ramirez](https://forum.cybermetrics.com/u/Jorge_Garcia_Ramirez)\
**Replies:** 5\
**Last updated:** [September 25, 2026, 4:28pm UTC](https://forum.cybermetrics.com/t/loading-a-template-onto-an-existing-gage/334 "2026-09-25T16:28:58Z")

</div>

Is there a way to load the test point template onto an existing gage?

---

## [Quick Tip: Creating Calibrations for Multiple Gages](https://forum.cybermetrics.com/t/quick-tip-creating-calibrations-for-multiple-gages/81)

<div class="topic-metadata">

**Author:** [@DrewW](https://forum.cybermetrics.com/u/DrewW)\
**Replies:** 8\
**Last updated:** [September 25, 2026, 4:16pm UTC](https://forum.cybermetrics.com/t/quick-tip-creating-calibrations-for-multiple-gages/81 "2026-09-25T16:16:32Z")

</div>

Did you know that GAGEtrak lets you create calibrations for multiple tools at the same time? Instead of creating calibration records one by one, you can knock them all out in a single process. Here’s how it works: Crea…

---

## [Removing multiple standards per test point,](https://forum.cybermetrics.com/t/removing-multiple-standards-per-test-point/333)

<div class="topic-metadata">

**Author:** [@awilbur](https://forum.cybermetrics.com/u/awilbur)\
**Replies:** 5\
**Last updated:** [September 25, 2026, 1:45pm UTC](https://forum.cybermetrics.com/t/removing-multiple-standards-per-test-point/333 "2026-09-25T13:45:05Z")

</div>

Can multiple standards per test point be remove at once? I made an error and need to get 3 standard per test point removed on about 25 gages. currently I can only delete one at a time…so time consuming. help

---

## [Changing Date Format on Labels](https://forum.cybermetrics.com/t/changing-date-format-on-labels/332)

<div class="topic-metadata">

**Author:** [@bobs](https://forum.cybermetrics.com/u/bobs)\
**Replies:** 5\
**Last updated:** [September 24, 2026, 5:09pm UTC](https://forum.cybermetrics.com/t/changing-date-format-on-labels/332 "2026-09-24T17:09:03Z")

</div>

Is there a way to change the gage label format on Gagetrak Lite? Currently GT shows it as 9/24/2026, but I need it to read “Sep 24, 2026” or “Sept 24, 2026” as it is written our process specs. Also eliminates any chance…

---

## [How to create a Calibrate before use label and certificate in gagetrak 8](https://forum.cybermetrics.com/t/how-to-create-a-calibrate-before-use-label-and-certificate-in-gagetrak-8/329)

<div class="topic-metadata">

**Author:** [@Jeremy\_Dressler](https://forum.cybermetrics.com/u/Jeremy_Dressler)\
**Replies:** 12\
**Last updated:** [September 24, 2026, 2:50pm UTC](https://forum.cybermetrics.com/t/how-to-create-a-calibrate-before-use-label-and-certificate-in-gagetrak-8/329 "2026-09-24T14:50:04Z")

</div>

I would like to be able to create and print a label and certificate for Calibrate Before Use. I would I do it?

---

## [Weekly Poll: What Is Your First Step When a Gage Is Out of Tolerance?](https://forum.cybermetrics.com/t/weekly-poll-what-is-your-first-step-when-a-gage-is-out-of-tolerance/330)

<div class="topic-metadata">

**Author:** [@Mclewley](https://forum.cybermetrics.com/u/Mclewley)\
**Replies:** 1\
**Last updated:** [September 21, 2026, 1:30pm UTC](https://forum.cybermetrics.com/t/weekly-poll-what-is-your-first-step-when-a-gage-is-out-of-tolerance/330 "2026-09-21T13:30:41Z")

</div>

When a gage is found out of tolerance, what does your team usually do first? poll What information makes the impact review easier or harder for your team?

---

## [Weekly Poll: What is the biggest challenge in managing your calibration program?](https://forum.cybermetrics.com/t/weekly-poll-what-is-the-biggest-challenge-in-managing-your-calibration-program/316)

<div class="topic-metadata">

**Author:** [@rstraube](https://forum.cybermetrics.com/u/rstraube)\
**Replies:** 15\
**Last updated:** [September 21, 2026, 12:41pm UTC](https://forum.cybermetrics.com/t/weekly-poll-what-is-the-biggest-challenge-in-managing-your-calibration-program/316 "2026-09-21T12:41:48Z")

</div>

Every calibration program has its pressure points. We would like to hear which challenge creates the most work—or the most frustration—in yours. Choose the answer that comes closest, and feel free to explain in the comm…

---

## [Procedures- adding a sorting ability](https://forum.cybermetrics.com/t/procedures-adding-a-sorting-ability/325)

<div class="topic-metadata">

**Author:** [@DaveM](https://forum.cybermetrics.com/u/DaveM)\
**Replies:** 1\
**Last updated:** [September 15, 2026, 5:29pm UTC](https://forum.cybermetrics.com/t/procedures-adding-a-sorting-ability/325 "2026-09-15T17:29:43Z")

</div>

I have been updating a lot of our procedures, but am finding the table on the right is getting cluttered. I understand why a procedure cannot be deleted as it is still in play in some past calibrations. But could we add…

---

## [GAGETrak on My Laptop](https://forum.cybermetrics.com/t/gagetrak-on-my-laptop/326)

<div class="topic-metadata">

**Author:** [@JRFDSFCVF](https://forum.cybermetrics.com/u/JRFDSFCVF)\
**Replies:** 0\
**Last updated:** [September 11, 2026, 1:07pm UTC](https://forum.cybermetrics.com/t/gagetrak-on-my-laptop/326 "2026-09-11T13:07:25Z")

</div>

I want to put GAGETrak on my business laptop versus using the one at work that’s hardwired to the ethernet there. My question is this: If I were to do so, but one day something happens to me and my laptop rendering both …

---

## [Weekly Poll: Audit Readiness](https://forum.cybermetrics.com/t/weekly-poll-audit-readiness/323)

<div class="topic-metadata">

**Author:** [@Mclewley](https://forum.cybermetrics.com/u/Mclewley)\
**Replies:** 4\
**Last updated:** [September 9, 2026, 4:12pm UTC](https://forum.cybermetrics.com/t/weekly-poll-audit-readiness/323 "2026-09-09T16:12:30Z")

</div>

What Is Hardest to Produce During a Calibration Audit? When an auditor or customer asks about a gage, what is most difficult to produce quickly? Answer choices: poll What normally slows the search down: incomplete ide…

---

## [How to add a signature to a cert](https://forum.cybermetrics.com/t/how-to-add-a-signature-to-a-cert/320)

<div class="topic-metadata">

**Author:** [@Gwelling](https://forum.cybermetrics.com/u/Gwelling)\
**Replies:** 3\
**Last updated:** [September 3, 2026, 11:12am UTC](https://forum.cybermetrics.com/t/how-to-add-a-signature-to-a-cert/320 "2026-09-03T11:12:34Z")

</div>

What are the steps for adding a signature to certs? I have admin but not sure how to go about doing it. Thanks for the help. Gene

---

## [GAGEtrak Shuts Down or Responds Slowly When Printing Calibration Work Orders](https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315)

<div class="topic-metadata">

**Author:** [@hsaintfelix](https://forum.cybermetrics.com/u/hsaintfelix)\
**Replies:** 1\
**Last updated:** [August 31, 2026, 3:19pm UTC](https://forum.cybermetrics.com/t/gagetrak-shuts-down-or-responds-slowly-when-printing-calibration-work-orders/315 "2026-08-31T15:19:42Z")

</div>

Good morning, I need some help with printing work orders. I’m currently unable to print anything without the system shutting down. When it does print, it takes approximately 10–15 minutes to complete. Could you please …

---

## [ISO 9001:2026 Arrives September 16—Don’t Rewrite Your QMS Yet](https://forum.cybermetrics.com/t/iso-9001-2026-arrives-september-16-don-t-rewrite-your-qms-yet/314)

<div class="topic-metadata">

**Author:** [@rstraube](https://forum.cybermetrics.com/u/rstraube)\
**Replies:** 0\
**Last updated:** [August 28, 2026, 7:14pm UTC](https://forum.cybermetrics.com/t/iso-9001-2026-arrives-september-16-don-t-rewrite-your-qms-yet/314 "2026-08-28T19:14:14Z")

</div>

ISO 9001:2026 Arrives September 16—Don’t Rewrite Your QMS Yet A new edition of ISO 9001 is almost here. If you handle the QMS, calibration, or internal audits, you have probably heard the question: “What do we need …

---

## [Error when trying to delete gages](https://forum.cybermetrics.com/t/error-when-trying-to-delete-gages/313)

<div class="topic-metadata">

**Author:** [@Akaiser](https://forum.cybermetrics.com/u/Akaiser)\
**Replies:** 1\
**Last updated:** [August 27, 2026, 8:11pm UTC](https://forum.cybermetrics.com/t/error-when-trying-to-delete-gages/313 "2026-08-27T20:11:52Z")

</div>

Hello, I need to delete some gage records and every time I try, I get an error message that Gagetrak needs to shut down and then it just closes. When I open it to check if the gage was deleted, it was not. Any help here…

---

## [What do Auditors Want to See in Your Calibration Records](https://forum.cybermetrics.com/t/what-do-auditors-want-to-see-in-your-calibration-records/312)

<div class="topic-metadata">

**Author:** [@rstraube](https://forum.cybermetrics.com/u/rstraube)\
**Replies:** 0\
**Last updated:** [August 26, 2026, 4:33pm UTC](https://forum.cybermetrics.com/t/what-do-auditors-want-to-see-in-your-calibration-records/312 "2026-08-26T16:33:05Z")

</div>

What Auditors Really Want to See in Your Calibration Records Few questions make a quality department pause quite like this one: “Can you show me the calibration record for this gage?” The auditor may have picked th…

---

## [GAGEtrak labels](https://forum.cybermetrics.com/t/gagetrak-labels/84)

<div class="topic-metadata">

**Author:** [@yamaholick](https://forum.cybermetrics.com/u/yamaholick)\
**Replies:** 11\
**Last updated:** [August 19, 2026, 11:23am UTC](https://forum.cybermetrics.com/t/gagetrak-labels/84 "2026-08-19T11:23:10Z")

</div>

In our older version we were able to edit the features in creating labels but this new PRO software I don’t see where that can be done. Can this still be accomplished in PRO?

---

## [Unable to see where to enter the Trace No. when updating the certificate](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304)

<div class="topic-metadata">

**Author:** [@Flowserve](https://forum.cybermetrics.com/u/Flowserve)\
**Replies:** 3\
**Last updated:** [August 18, 2026, 5:27pm UTC](https://forum.cybermetrics.com/t/unable-to-see-where-to-enter-the-trace-no-when-updating-the-certificate/304 "2026-08-18T17:27:14Z")

</div>

Question about where to enter the Trace No in the calibration certificate.

---

## [How to retrieve a deleted gage](https://forum.cybermetrics.com/t/how-to-retrieve-a-deleted-gage/297)

<div class="topic-metadata">

**Author:** [@Gwelling](https://forum.cybermetrics.com/u/Gwelling)\
**Replies:** 8\
**Last updated:** [August 12, 2026, 10:06pm UTC](https://forum.cybermetrics.com/t/how-to-retrieve-a-deleted-gage/297 "2026-08-12T22:06:34Z")

</div>

How can I retrieve a deleted file I deleted in error?

---

## [Editability for forms and calibration certificates?](https://forum.cybermetrics.com/t/editability-for-forms-and-calibration-certificates/299)

<div class="topic-metadata">

**Author:** [@RobDub](https://forum.cybermetrics.com/u/RobDub)\
**Replies:** 0\
**Last updated:** [August 12, 2026, 12:59pm UTC](https://forum.cybermetrics.com/t/editability-for-forms-and-calibration-certificates/299 "2026-08-12T12:59:58Z")

</div>

is there any way to edit forms on Gagetrak pro?

---

## [GAGEtrak Tip: How to Archive Calibration Records](https://forum.cybermetrics.com/t/gagetrak-tip-how-to-archive-calibration-records/49)

<div class="topic-metadata">

**Author:** [@Trogers](https://forum.cybermetrics.com/u/Trogers)\
**Replies:** 8\
**Last updated:** [August 5, 2026, 4:32pm UTC](https://forum.cybermetrics.com/t/gagetrak-tip-how-to-archive-calibration-records/49 "2026-08-05T16:32:17Z")

</div>

Archiving older calibration records helps keep your database performant while preserving historical data for reference. Below are the recommended steps for using the GAGEtrak Archiver. Steps to Archive Calibrations O…

---

## [One Size Doesn’t Fit All: Managing Measuring Tools and Consumables](https://forum.cybermetrics.com/t/one-size-doesn-t-fit-all-managing-measuring-tools-and-consumables/293)

<div class="topic-metadata">

**Author:** [@rstraube](https://forum.cybermetrics.com/u/rstraube)\
**Replies:** 0\
**Last updated:** [August 4, 2026, 7:28pm UTC](https://forum.cybermetrics.com/t/one-size-doesn-t-fit-all-managing-measuring-tools-and-consumables/293 "2026-08-04T19:28:09Z")

</div>

One Size Doesn’t Fit All: Managing Measuring Tools and Consumables Last month, my National Tape Measure Day article explored why even one of the simplest measuring tools can play an important role in the measurement pro…

---

## [How are people handling gage families?](https://forum.cybermetrics.com/t/how-are-people-handling-gage-families/290)

<div class="topic-metadata">

**Author:** [@cawatton](https://forum.cybermetrics.com/u/cawatton)\
**Replies:** 4\
**Last updated:** [July 30, 2026, 12:49pm UTC](https://forum.cybermetrics.com/t/how-are-people-handling-gage-families/290 "2026-07-30T12:49:27Z")

</div>

How are people handling gage families in GageTrak? Here’s some context: We perform MSA on a schedule; not by individual gage, but by gage families. I want GageTrak to remind me when an MSA study is due for each gage …

---

## [Gage Type Qty Tracker](https://forum.cybermetrics.com/t/gage-type-qty-tracker/286)

<div class="topic-metadata">

**Author:** [@Lilransdawg](https://forum.cybermetrics.com/u/Lilransdawg)\
**Replies:** 0\
**Last updated:** [July 27, 2026, 4:46pm UTC](https://forum.cybermetrics.com/t/gage-type-qty-tracker/286 "2026-07-27T16:46:20Z")

</div>

We like to keep a certain quantity of every gage in stock depending on the type. Is there any feature within GageTrak that can keep track of how many of each gage type we have and notify me when the quantity dips below t…

---

## [Mass Migration of Calibrations from One Month to Another](https://forum.cybermetrics.com/t/mass-migration-of-calibrations-from-one-month-to-another/280)

<div class="topic-metadata">

**Author:** [@JRFDSFCVF](https://forum.cybermetrics.com/u/JRFDSFCVF)\
**Replies:** 1\
**Last updated:** [July 13, 2026, 2:01pm UTC](https://forum.cybermetrics.com/t/mass-migration-of-calibrations-from-one-month-to-another/280 "2026-07-13T14:01:56Z")

</div>

All, Is there a shortcut in GAGEtrak that allows me to move most of my calibration-due listings from one month to another (e.g., gages “A-F” are now due in May versus June) all at once?

---

## [Linking Cal "completed" and reading temp/humidity together](https://forum.cybermetrics.com/t/linking-cal-completed-and-reading-temp-humidity-together/279)

<div class="topic-metadata">

**Author:** [@bobs](https://forum.cybermetrics.com/u/bobs)\
**Replies:** 0\
**Last updated:** [July 10, 2026, 1:11pm UTC](https://forum.cybermetrics.com/t/linking-cal-completed-and-reading-temp-humidity-together/279 "2026-07-10T13:11:29Z")

</div>

Hi, Is there a way to link the “temp/humidity” readings so that it is captured when I click the “calibrations completed” button? My old GT 6.6 would do that and it made life easier as it is less buttons to click. thank…

---

## [How To Sign The Calibration Certificates](https://forum.cybermetrics.com/t/how-to-sign-the-calibration-certificates/276)

<div class="topic-metadata">

**Author:** [@arivo](https://forum.cybermetrics.com/u/arivo)\
**Replies:** 3\
**Last updated:** [July 9, 2026, 5:13pm UTC](https://forum.cybermetrics.com/t/how-to-sign-the-calibration-certificates/276 "2026-07-09T17:13:10Z")

</div>

Hi. I want to sign the calibration certificates that I create, but whenever I click “Sign,” I get a pop-up message saying that I need to enable security before I can sign a calibration (see the screenshot below). How d…

---

## [Label Print Causes Crash](https://forum.cybermetrics.com/t/label-print-causes-crash/278)

<div class="topic-metadata">

**Author:** [@Bearded\_Gage\_Guy](https://forum.cybermetrics.com/u/Bearded_Gage_Guy)\
**Replies:** 1\
**Last updated:** [July 9, 2026, 1:24pm UTC](https://forum.cybermetrics.com/t/label-print-causes-crash/278 "2026-07-09T13:24:11Z")

</div>

we purchased a label printer with our software upgrade, we have installed the printer (physically and drivers). the print is directly connected to the pc with the Gagetrak Lite application installed, everything is up to …

---

## [Gage won't update when deleting test point steps in template](https://forum.cybermetrics.com/t/gage-wont-update-when-deleting-test-point-steps-in-template/277)

<div class="topic-metadata">

**Author:** [@bobs](https://forum.cybermetrics.com/u/bobs)\
**Replies:** 2\
**Last updated:** [July 9, 2026, 1:23pm UTC](https://forum.cybermetrics.com/t/gage-wont-update-when-deleting-test-point-steps-in-template/277 "2026-07-09T13:23:05Z")

</div>

Using GT Lite 8.8.4.3752, I can use gage template add a test point and have it update on my gages linked to that template. But, if I delete a test point in the template and try to update to the current linked gages; it w…

[Previous page](https://forum.cybermetrics.com/c/gagetrak/4.md)

[Next page](https://forum.cybermetrics.com/c/gagetrak/4.md?page=2)
